[cisco-voip] Setting up local DSP resources on 2821

Ortiz, Carlos CORTIZ at broward.org
Wed Sep 6 15:38:19 EDT 2006


I guess my original question wasn't clear, but that's what I needed to
know.  Now that I have made the name in dspfarm profile config on the
gateway and the CM CFB configuration page the same I see the following
from show dspfarm profile 1:

Profile ID = 1, Service = CONFERENCING, Resource ID = 1  
 Profile Description :  
 Profile Admin State : UP 
 Profile Operation State : ACTIVE 
 Application : SCCP   Status : ASSOCIATED 
 Resource Provider : FLEX_DSPRM   Status : UP 
 Number of Resource Configured : 2 
 Number of Resource Available : 2

Thanks for the help!

-----Original Message-----
From: Ryan Ratliff [mailto:rratliff at cisco.com] 
Sent: Wednesday, September 06, 2006 3:03 PM
To: Ortiz, Carlos
Cc: Erik Erasmus (E); Ted Nugent; Wydra, Jason;
cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Setting up local DSP resources on 2821

The name in CCMAdmin is either a prefix followed by the mac-address  
of the interface specified by the 'sccp local' command OR a name  
specified by you in the dspfarm profile 'associate profile x register  
y' where x is the number of the dspfarm profile and y is any name you  
want.

If you are using the older PDVMs that don't support dspfarm profiles  
the name is not configurable in IOS and will always be the prefix  
(CFB, MTP) followed by the mac-address of the interface.

-Ryan

On Sep 6, 2006, at 2:56 PM, Ortiz, Carlos wrote:

I ran a show media resource status on the router and see the following:

Lowrise#sh media resource status
  Resource Providers:

  Resource  Provider ID :: FLEX_DSPRM Status :: REGISTERED
  Service Profiles
  MTP ::
  TRANSCODING ::
  CONFERENCING :: 1
  Applications :
  Application ID : SCCP, Status : REGISTERED

I guess that looks as it should.....

What appears incorrect is

Profile ID = 1, Service = CONFERENCING, Resource ID = 1
  Profile Description :
  Profile Admin State : UP
  Profile Operation State : ACTIVE IN PROGRESS
  Application : SCCP   Status : ASSOCIATION IN PROGRESS
  Resource Provider : FLEX_DSPRM   Status : UP
  Number of Resource Configured : 2
  Number of Resource Available : 2

There is a required parameter on the Call Manager:

Conference Bridge Name  Enter the same name that exists in the gateway
Command Line Interface (CLI).


What name are they referring too?

-----Original Message-----
From: Ryan Ratliff [mailto:rratliff at cisco.com]
Sent: Wednesday, September 06, 2006 2:25 PM
To: Ortiz, Carlos
Cc: Erik Erasmus (E); Ted Nugent; Wydra, Jason;
cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Setting up local DSP resources on 2821

It's CallManager that decides what resources a device uses. The
configuration on the router is simply to get it registered.

You put the device in a MRG, and then the order of MRGs in the MRGL
decides preference.

-Ryan

On Sep 6, 2006, at 2:02 PM, Ortiz, Carlos wrote:

Were the questions regarding DSPFARM configs in the email below ever
answered?

I have configured my DSPFARM on a 2811 but how do you actually make
these resources the first choice for the users at that remote site?  I
assume some configuration in the conf bridge resources and MRGL but I
can't find a doc specifically for the 2800 routers.  Anyone have a link?

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Erik Erasmus
(E)
Sent: Tuesday, July 18, 2006 3:20 PM
To: Ted Nugent; Wydra, Jason; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Setting up local DSP resources on 2821


Hi Ted

Sounds like you have done it a couple of times.

Q1. I notice in the config examples they have an example that has

voice-card 1
no dspfarm
dsp services dspfarm

bit confusing - why no dsprarm and right below it dsp services dspfarm
???

Q2. They also show
associate profile 10 register CFB123456789966
associate profile 6 register MTP123456789988

where does the values after register come from - are they arbitrary
things one choose and need to be unique per site and per profile I
register etc.???


oip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



More information about the cisco-voip mailing list