[cisco-voip] Callmanager 4.1(3) and SRST

[Karl Whitson]

Ahmad,

First configure your SRST router in Call Manager under Menu option System, SRST.  Then create two Device Pools one with the SRST router you configured in step 1.  The other Device Pool with the SRST Reference set as Disable.  Then assign the Device Pools to the appropriate devices.  Only those devices with the SRST reference will register with the gateway during a WAN outage.

Karl Whitson
CMB Technologies
40 Cape Rd.
Milford, MA  01757
DID:  (508) 422-8413
Cell:  (603) 930-4189
Fax:  (508) 634-8678
Karl.Whitson at cmbtec.com
www.cmbtec.com
TO OPEN A SUPPORT CASE EMAIL SUPPORT at CMBTEC.COM OR CALL (508) 422-8429
 
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ahmad Cheikh Moussa
Sent: Thursday, September 07, 2006 7:05 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Callmanager 4.1(3) and SRST

Hi!

Quick question. Can I define, which IP Phone
has the ability to use SRST and which not ?
Is there a way to do so via device pool ?
I have approximately 300 Phones, but a gateway which
only support SRST for 48 Phones. I thought, that I define
the 48 Phones, which are allowed to use the SRST.

Regards,
 Ahmad

-- 
Ahmad Cheikh-Moussa
NetUSE AG
Dr.-Hell-Straße, 24107 Kiel, Germany
Telefon: +49 431 2390 400 --  Telefax: +49 431 2390 499
Service: Service at NetUSE.DE --  http://NetUSE.DE/


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip