[cisco-voip] SRST inbound call

[Bill Riley III]

I have several remote branches where I have broadcast hunt groups setup
in call manager to ring multiple phones when a call comes in on the FXO
ports. The FXO ports have a PLAR to the hunt pilot which rings most of
the phones at that location. I have a translation rule and dial-peers
setup so that when the GW cannot contact the call manager it will
translate the DN of the hunt pilot to a DN that is local to that branch.
All of that works correctly when the phone is switched to SRST but it
only rings one phone. I know SRST does not have any sort of broadcast
hunt groups in its functionality but I am trying to find a way to make
the second inbound call ring to a different phone if the first phone is
busy. 

 

 

Thanks,

 

 

NOTICE: This electronic mail message and any files transmitted with it are intended exclusively
for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged
information. Any unauthorized review, use, printing, saving, copying, disclosure 
or distribution is strictly prohibited. If you have received this message in error, please immediately
advise the sender by reply email and delete all copies.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060912/48f6622f/attachment.html