[cisco-voip] Delayed audio-cutover with H.323 gateway

[Voll, Scott]

Why would you run T code on a CMM?  I'm running 12.4(7a) without issues.

Scott

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Chris Ellington
Sent: Tuesday, September 12, 2006 9:35 AM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Delayed audio-cutover with H.323 gateway

There is absolutely something wrong with 12.4T code - I had a similar
issue
with delayed audio path that my TAC guy could never figure out;
eventually
the gateway quit passing any traffic and a reload solved everything.

This is a CMM running 12.4(6)T3 code (which admittedly is not the latest
code for the CMM).

I had my TAC case open for 3 weeks with no resolution but am looking to
roll
back to the latest 12.3T code for the CMM.

Chris


On 9/12/06 12:00 PM, "cisco-voip-request at puck.nether.net"
<cisco-voip-request at puck.nether.net> wrote:

> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Tue, 12 Sep 2006 09:31:19 -0400
> From: Wes Sisk <wsisk at cisco.com>
> Subject: Re: [cisco-voip] Delayed audio-cutover with H.323 gateway
> To: Erick Bergquist <erickbe at yahoo.com>
> Cc: ciscovoip <cisco-voip at puck.nether.net>
> Message-ID: <523879D3-62CE-4E34-8E45-B40B202E235B at cisco.com>
> Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed
> 
> What is round trip time from gateway to CM?  Are you using fast start
> on CM and the gateway?
> 
> /Wes
> 
> On Sep 11, 2006, at 10:19 PM, Erick Bergquist wrote:
> 
> Hi,
> 
> I'm having a issue where an inbound call comes in FXO port and
> connection plar's to a shared DN across 5 IP Phones. The phone call
> gets answered fine, but the user on IP phone saids "Welcome to
> BlahBlah" and the outside caller doesn't hear the first time they say
> "Welcome To BlahBlah" and the IP Phone user repeats their greeting
> and they hear it the second time fine.
> 
> There are no errors on any interfaces that I can see, and the gateway
> has voice rtp send-recv enabled. Issue does not happen on calls over
> PRI, just the analog FXOs. I have disabled caller-id on the voice-
> port and also tried connection plar opx with no difference. Sometimes
> it works fine but rarely.
> 
> CCM is version 4.1(3)sr3c and the gateway is a 1760 running 12.4(8a).
> 
> A similar problem can happen when the call is parked or put on hold
> also, now and then.
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 


-- 
Christopher S. Ellington
CCIE #6814
Network Solutions, Inc.
(317) 566 8897
Chris.Ellington at nsi1.com


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip