[cisco-voip] BAT question-- CCM 4.01

[Matt Slaga (US)]

Unless you already have your softkey templates assigned per device (not
set to default), the easiest way to change it is through the device
pools.  It is generally a good idea to leave all DP settings as default
on the phones so you don't have to change potentially hundreds or
thousands of individual devices but just a handful of device pools.

 

 

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Tim Reimers
Sent: Wednesday, September 13, 2006 3:28 PM
To: Cisco Voip
Subject: [cisco-voip] BAT question-- CCM 4.01

 

Is it possible to update the softkey template globally using BAT? 

I've designed a new softkey template that applies QRT and MCIS 
but I cannot figure out how to get that softkey template to be in use on
the phones globally.. 
(or even a test subset of phones) 

Softkey template doesn't appear in the BAT menus for phone or for line. 

I could change it on every phone, but that would NOT be workable with
500 phones... 

Does this mean that softkey settings are globally configured somewhere
else? 

I see device profiles as a possibility, but my vendor didn't configre
any device profile 
apparently. When I do a search for "device profile" and leave the box
empty, 
there's nothing reported in the search 

ideas?? 

thanks, Tim 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060914/e569e46c/attachment-0001.html