[cisco-voip] MGCP and FXS ports

[David Fielder (US)]

I have a fax machine connected to an FXS port off my gateway. I have the
Gateway configured for MGCP. The port is configured in CallManager and
the DN for the fax machine has been added. When I call the fax either
from and external line or 4 digits I get fax tone. When they attempt to
make an outbound call from the fax machine, they get dial tone and it
will attempt to dial the digits and then immediately go to a fast busy.
If I do a show voice port summary, I see the port go off hook. I have
looked through the CallManager's logs and I don't think it ever reaches
the CM. I have configured an IP phone to emulate the port and DN
settings and I am able to make call internal and external. So it appears
that the call routing in CM is fine. All the fax machines on the FXS
ports are doing this. Has anyone ever seen this before?

 

David Fielder

Senior Engineer

Dimension Data

Office: (336) 510-9431

Mobile: (336) 669-5129

david.fielder at us.didata.com

 

 

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060918/8c517f12/attachment.html