[cisco-voip] Ok to run HP Openview client on CCM 4.x servers?

[Mike Lay (milay)]

Below are the supported HP Openview components that are supported with
CCM, we only list support for 4.0 & 4.1:
 
IP Communications - Platform/Remote Agents 5.2
http://www.cisco.com/pcgi-bin/ecoa/displayProfile.pl?PARTNER_ID=41474
 
IP Communications - Platform/Remote Agents 8.10 & 7.27
http://www.cisco.com/pcgi-bin/ecoa/displayProfile.pl?PARTNER_ID=41471
 
IP Communications - Platform/Remote Agents 3.65
http://www.cisco.com/pcgi-bin/ecoa/displayProfile.pl?PARTNER_ID=41473
 
Mike

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Rhodes, Geoff
Sent: Monday, September 18, 2006 12:51 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Ok to run HP Openview client on CCM 4.x servers?


I assume it's ok, but wanted to see if anyone is doing it and any
problems they have seen.  We want to make sure any critical server we
have is watched by Openview.
 
Thanks!
 
Geoff Rhodes
Director, Information Technology
Robinson, Bradshaw & Hinson, P.A.
704 / 377-8188
grhodes at rbh.com
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060918/e78c67f5/attachment-0001.html