[cisco-voip] VG224 cables

[Jason Aarons (US)]

AbleComm sold me a "tailblock" that we then cross-connected the
modems/faxes.

 

http://www.phonegeeks.com/tailwitatcab.html

 

For next project I need to go to from VG224 to RJ-45 block

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Martin Lohnert
Sent: Wednesday, September 20, 2006 6:02 AM
To: Cisco Voip
Subject: [cisco-voip] VG224 cables

 

Hi,

where do you guys get the RJ21-to-RJ45-patch-panel cables for VG224's ?
So far we've made them ourselves, but it just takes too much time and
effort and lacks reliability. I've searched the web for a good source,
but most places seem to have patch panels with 24 Rj45 ports and 2
RJ21's while VG224 has only one RJ21... Two of these can also be used
for a VG248. Any tips who manufactures/sells these...? 

 

Cheers,

Martin

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060920/9dc91337/attachment.html