[cisco-voip] busy out PRI

[Melvin Fong]

Thanks, this looks like it will help

>>> Ryan Ratliff <rratliff at cisco.com> 9/20/06 11:04:53 >>>
Click on the name of the parameter to see the description for it.   
This has all the info you need.

-Ryan

On Sep 20, 2006, at 2:03 PM, Melvin Fong wrote:

Ryan,
    I found the "Change B-Channel Maintnance Status" but I am having  
trouble
finding documentation as to what I enter into the field and as to  
what status 1-5 are.  Can you point me in a direction?  I would  
appreciate it. Thanks
Mel

>>> Ryan Ratliff <rratliff at cisco.com> 9/20/06 10:03:34 >>>
Take a look at the description for the advanced CM service parameter
"Change B-Channel Maintenance Status".
This is for MGCP PRIs only of course.  For H.323 it's all done in IOS.

-Ryan

On Sep 20, 2006, at 12:25 PM, Melvin Fong wrote:

Does anyone know of a way to busy out a PRI using call manager?
I don't see anything on the gateway config.  The only way I know of
is to busy the port that is connected to the PRI.  The question is
whether CM will recognize the circuit as not usable. If the port is
disabled then the D link should go down and hopefully CM will send
the calls to the 2nd PRI on the route list.  I haven't tested this
yet and hoped someone else has already.  Thanks
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060920/1bfebf25/attachment.html