[cisco-voip] Less Route Patterns for Toll Free

[Jason Burton]

You can use a route filter that looks for area codes 800,855,866,877,888 and then have a route pattern 8.@ that references that route filter



From: Carter, Bill
Sent: Wed 9/27/2006 1:31 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Less Route Patterns for Toll Free


 
I am looking for a way in CallManager to reduce the 5 route patterns for
toll free.  Right no I use:
9.1[800]XXXXXXX
9.1[855]XXXXXXX
9.1[866]XXXXXXX
9.1[877]XXXXXXX
9.1[888]XXXXXXX

Any suggestions?


This email may contain proprietary and confidential information for the sole use of the intended recipient. 
Any review, retransmission, dissemination, or other use of this information by persons or entities other than 
the intended recipient is prohibited. If you are not the intended recipient, please contact the sender and 
delete all copies. To the extent that opinions are expressed in this message, they are not necessarily the 
opinions of Sentinel Technologies or any of its affiliates, employees, directors, officers or shareholders.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060927/2e94b901/attachment.html