[cisco-voip] Configuring pickup groups

[Justin Steinberg]

remove the pickup softkey and just leave opickup.

On 9/27/06, Robert Kulagowski <bob at smalltime.com> wrote:
>
> Justin Steinberg wrote:
> > You can do this with oPickup.
> >
> > Configure an pickup group "Everyone", add all phones to this group.
> > Configure an pickup group "Overhead night bell", add the DN of the night
> > bell to this group.
> >
> > Then add the park number for the "Overhead night bell" pickup group as a
> > current pickup group member of the "everyone" pickup group.
> >
> > Fwd the receptionist phone to a DN that is a member of "overhead night
> > bell" pickup group.
> >
> > Any phone in the "everyone" pickup group can dial opickup and answer the
> > night bell.
> >
> > You could put all phones, night bell dn, and pickup groups in the same
> > partition and that would be fine.
>
> Right; I tried this, but the issue is that any phone can still pickup
> any other ringing phone (because they're all in the same pickup group),
> which is not what I want.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060928/608e5b67/attachment.html