[cisco-voip] Default Qos behaviour

[Aman Chugh]

Thanks for the reply ryan,I have a 3560 switch and qos is not enabled on any
ports or globaly.will the qos both layer 2 (COS) and layer 3 (DSCP ) be
removed/disregarded by the switch which is set by Ipphones.

Aman


On 9/28/06, Ryan Ratliff <rratliff at cisco.com> wrote:
>
> Depends on the switch hardware and whether qos is enabled or not
> globally on the switch.
>
> The QOS SRND talks about this for the 6500 and 3550 switches (perhaps
> others too).
>
> -Ryan
>
> On Sep 28, 2006, at 10:22 AM, Aman Chugh wrote:
>
> All,
>
> I would like to understand the default behaviour for QOS marking set
> by an Ip phone for voice packets,In my scenario if dont have any qos
> settings configured on the switch ,will the switch disregard/remove
> the marking set by a cisco ipphone before passing them on next hop
> device,I ask this because as I have configured CBWFQ with LLQ on my
> router but dont have any qos settings on my switch where my phone
> connects ,I have not checked this out with a sniffer just wanted to
> know if any one in the group knows about the same.
>
> Thanks for the help
>
> Aman
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060928/e734985b/attachment.html