[cisco-voip] SRST and Large Sites

[STEVEN CASPER]

These are sites that are configured with Gig-E across a dark fiber ring.
Our strategy is a centralized cluster split across our 2 data center
locations. Perhaps I should look at locating backup CCM servers these
sites.

>>> "Jim McBurnett" <jim at tgasolutions.com> 09/29/06 6:49 AM >>>
Steven,
I have a few customers that are this size, and we recommended a CCM
server to sit there.
The control and phone upgrades would kill a WAN link.
DO you have a DS-3 here?
Or at least a frac ds-3?

Check out the SRND
www.cisco.com/go/SRND 
 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net 
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of STEVEN CASPER
Sent: Friday, September 29, 2006 6:42 AM
To: cisco-voip at puck.nether.net 
Subject: [cisco-voip] SRST and Large Sites


Curious as to how or if anyone uses SRST for large sites (500+)
telephones. Does any one do this and if so how do they have it set up
-
for instance all users to one 3845 router or are they spread across a
couple of routers.

Thanks!
Steve


Steve Casper
Voice Technologies
M&T Bank
(410) 347-6026

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip