[cisco-voip] MWI

[Stu Packett]

I had a similar issue when I first rolled out Unity.  It turned out to
be a calling search space / partition issue.  You should look there
first.

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Marcus Smith
Sent: Friday, September 29, 2006 12:50 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] MWI


I have a little problem that will not go away.  A user phone MWI does
not light up when there is a message for her.  I have checked everything
to resolve this issue, but it is still there.  Even deleted the
extension and recreated it, but still no luck, also, checked her profile
sheet in CCM, everything is good.  what else can I check to resolve this
issue.  Yes, the light does work  when incoming calls are received.
 
Marcus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060929/d1a28ee7/attachment-0001.html