[cisco-voip] MWI

[Voll, Scott]

We are a small deployment ~500 subscribers but we have it set to resync
each night.

 

Also, have you rebooted your exchange server and not your Unity server
after the exchange server? This can cause this kind of issue also.

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Krueger, Brett
Sent: Friday, September 29, 2006 1:10 PM
To: Keith Klevenski; Marcus Smith; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] MWI

 

We actually have the same issue here.  Seems that its random throughout
our installs and refreshing the status of the MWI through Unity sets it
correctly.  Some sort of sync issue possibly?  Unity 4.0(5).  After our
plans of upgrading Unity, if its still persists i guess then I might go
as far as opening up a TAC case on it.

*shrug*

 

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Keith Klevenski
Sent: Friday, September 29, 2006 9:55 AM
To: Marcus Smith; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] MWI

Can you dial the MWI On extension from the phone and turn it on?

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Marcus Smith
Sent: Friday, September 29, 2006 2:50 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] MWI

 

I have a little problem that will not go away.  A user phone MWI does
not light up when there is a message for her.  I have checked everything
to resolve this issue, but it is still there.  Even deleted the
extension and recreated it, but still no luck, also, checked her profile
sheet in CCM, everything is good.  what else can I check to resolve this
issue.  Yes, the light does work  when incoming calls are received.

 

Marcus

________________________________


E-MAIL CONFIDENTIALITY NOTICE:
The contents of this e-mail message and any attachments are intended
solely for the addressee(s) and may contain confidential and/or legally
privileged information. If you are not the intended recipient of this
message or if this message has been addressed to you in error, please
immediately alert the sender by reply e-mail and then delete this
message and any attachments. If you are not the intended recipient, you
are notified that any use, dissemination, distribution, copying, or
storage of this message or any attachments is strictly prohibited.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060929/147e3b31/attachment-0001.html