[cisco-voip] Unity Tech Admin

[Rasim Duric]

It's in the \commserver directory. You run it from the command line, for
example if you want to assign the EAdmin rights to a particular userID:

 

GrantUnityAccess -u NT4DOMAIN\userID -s EAdmin

 

Rasim Duric
Network Analyst (CCS)
University of Guelph
Guelph, N1G 2W1, ON
519-824-4120x53146
rduric at uoguelph.ca

________________________________

From: Voll, Scott [mailto:Scott.Voll at wesd.org] 
Sent: Friday, September 29, 2006 5:26 PM
To: Rasim Duric
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Unity Tech Admin

 

Thanks

 

I couldn't remember the GrantUnityAccess utility.

 

Scott

 

________________________________

From: Rasim Duric [mailto:rduric at uoguelph.ca] 
Sent: Friday, September 29, 2006 11:42 AM
To: Voll, Scott
Subject: RE: [cisco-voip] Unity Tech Admin

 

You can create the same COS on the PBX Unity server and assign a
subscriber to it. Now, you'll need GrantUnityAccess for all HelpDesk
users to this particular subscriber. 

 

Rasim Duric
Network Analyst (CCS)
University of Guelph
Guelph, N1G 2W1, ON
519-824-4120x53146
rduric at uoguelph.ca

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Friday, September 29, 2006 2:28 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Unity Tech Admin

 

I have two Unity servers both running unity 4.0.5.  one connected to my
CM 4.1.3sr2 and one to my old PBX.  Both are digitally networked and
working fine.

 

I have made myself an admin on the CM Unity box and then had to so some
utility to make myself an admin on the PBX Unity server.

 

I have now made a COS on the CM Unity server for our Helpdesk to
add/change/delete subscribers but now how do I do that on the PBX Unity
server?

 

Scott

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060930/7a767a42/attachment.html