[cisco-voip] calling part transformation mask for did range

[Voll, Scott]

Why don't you just set it on the line?  Or you just don't want to do it
on 50 lines?

 

Why can't you use the []?  

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of gokhan senol
Sent: Monday, April 02, 2007 12:39 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] calling part transformation mask for did range

 

Hi

I got ccm 4.1.3 and PRI line on 2851 router. they connected as mgcp.

my DID range 4441000  - 4441199   .  200 did numbers

 

what i wanna do is the callerID for the numbers between 4441155 and 1199
should be seen as 4441155

 

i mean  i wanna do calling party trasformation mask like below.

did numbers in that range  > before mask 44411[59]X    > after mask
4441155

 

so i can not use bracket '[ ] ' . how can do this and where to do this
is better. In route group or in translation pattern or in route list. 

thanks a  lot

 

 

________________________________

Don't pick lemons.
See all the new 2007 cars
<http://autos.yahoo.com/new_cars.html;_ylc=X3oDMTE0OGRsc3F2BF9TAzk3MTA3M
Dc2BHNlYwNtYWlsdGFncwRzbGsDbmV3Y2Fycw-->  at Yahoo! Autos.
<http://autos.yahoo.com/new_cars.html;_ylc=X3oDMTE0OGRsc3F2BF9TAzk3MTA3M
Dc2BHNlYwNtYWlsdGFncwRzbGsDbmV3Y2Fycw--> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070402/50e67159/attachment.html