[cisco-voip] Configuring multiple SIP Trunks on an IOS Gateway

[Mike Nelson]

Sorry for the resend, I missed the subject on the first try.

*********************************************** 

Good Day,

 

I am installing a CME (2811 / 12.4.11XJ / CME 4.1) and the customer uses
SIP Trunks for purposes of sending calls to the PSTN.     The catch is
that there are 2 different providers with 2 sets of credentials.    Is
there a way to configure both and use them in order of preference?    My
understanding is that I am to use the SIP-UA subcommands to set up the
server & credentials, and then refer to 'sip-server' in my dial-peer
rather than the IP of the server.    I just don't see the provision for
using more than 1 provider.

 

Any thoughts would be appreciated. 

 

Thanks,

 

Mike

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070403/1e5f397a/attachment.html