[cisco-voip] Assign conference resources to Meet-Me

[Voll, Scott]

Do you have a device pool for the remote site?  Add the MRGL to the
device pool that includes the new resources.  And you could also put the
main site in as a secondary group so they have access to both.

 

But this would mean you would not have MRGL applied to the phones in
order for this to work. (BAT?)

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
c3voip at nc.rr.com
Sent: Thursday, April 05, 2007 8:30 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Assign conference resources to Meet-Me

 

As far as I know conference resources are allocated by a MRGL which is
associated to a phone.

 

Is there a way to associate a particular group of resources to a
Meet-Me, so that all callers only use those resources?

 

 

Maybe there is a better way to think about it.  Here is my problem:

 

I have a remote office that needs more Meet-me numbers, and currently
they use the resources at our main site.  The problem is that they do
not have enough bandwidth back to our main site for more calls.  So we
have HDV2 modules that we can put up there, but the problem is getting
them to use them instead of trying to use the main site resources.  We
have CMM's at our main site which will allow more than 8 participants on
a Meet-me, and the HDV2's will only allow 8 participants.  So I want to
setup a small Meet-me pool (local HDV2 resources) and a large Meet-me
pool (main site CMM resources).  Is there a way to do this?

 

TIA,

-C

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070405/c1c49ae2/attachment-0001.html