[cisco-voip] Routing a PRI Number

[Jonathan Charles]

Oh, yeah, you also want to make sure you set the hunt method.

If you want all three extensions to ring, make it a broadcast.



Jonathan

On 4/6/07, Craig Staffin <craig at staffin.org> wrote:
>
> Correct setup a hunt list.  So make a hunt pilot and assign a line group
> with the below numbers in it.
>
> Craig
>
> On 4/6/07, Todd Franklin < toddnh65 at gmail.com> wrote:
> >
> > I posted a start on this a while back, and your answers were helpful!
> > But I think I am stuck!
> >
> > I have a PRI line.  We have a flat network that interconnects 4
> > buildings with one CCM and Unity box running the show.
> >
> > So someone calls in, 555-1212.  I have my telco ready to move 1212 to
> > the PRI, so I should be able to tell CCM to grab that
> > pretty easy.  When 1212 comes in, I want to ring extensions 3200, 2301,
> > and 3202.  I think this is where I am stuck.
> >
> > Do I setup a Line Group?  A Hunt List?  Where do I go from here?
> >
> > Thanks.
> >
> > Todd
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
>
>
> --
> Craig Staffin
> Craig at staffin.org
> (H) 262-437-7313
> (C) 262-613-6003
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070406/ac88508c/attachment.html