[cisco-voip] H323 testing

[Kalle Tetto]

Hi,

the telco and the vgw negotiate the channel, so you don't need to worry 
for incoming calls at least on an E1 line. You should use the isdn 
bchan-ordering ascending, so you start always with the first free channel.


Craig Staffin schrieb:
> the only issue is you will only be able to configure 8 channels.  So 
> make sure that the telco or PBX only sends calls on the first 8 channels.
> 
> Craig
> 
> On 4/9/07, * Voll, Scott* <Scott.Voll at wesd.org 
> <mailto:Scott.Voll at wesd.org>> wrote:
> 
>     I need to move my main VGW from MGCP to H323 so I have a spare 2801
>     and VWIC-2MFT-T1 but it only has one DSP (8 voice resources).  Can I
>     use one PRI so long as I don't go over the DSP resources?  My guess
>     is I would only be making one or two calls at a time for testing.
> 
>      
> 
>     Any thoughts?
> 
>      
> 
>     scott
> 
> 
>     _______________________________________________
>     cisco-voip mailing list
>     cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>     https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> 
> 
> 
> -- 
> Craig Staffin
> Craig at staffin.org <mailto:Craig at staffin.org>
> (H) 262-437-7313
> (C) 262-613-6003
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip