[cisco-voip] Change default 'unknown'

[Riley, Andrew]

Great thanks. Have found this in 4.2 service param's also.  looks good I
agree. 

Thanks Scott. 

Andrew

________________________________

From: Voll, Scott [mailto:Scott.Voll at wesd.org] 
Sent: Thursday, 12 April 2007 1:12 AM
To: Ahmed Elnagar; Riley, Andrew; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Change default 'unknown'



CM 4.1

 

Unknown Caller ID Flag : 

 

This parameter enables the Unknown Caller ID and Unknown Caller ID Text
parameters. If this parameter is set to True, the information that is
provided in the Unknown Caller ID and Unknown Caller ID Text parameters
displays to called parties for inbound calls that are received without
caller ID information. Valid values specify True (display the
information specified in the Unknown Caller ID and Unknown Caller ID
Text parameters) or False (do not provide any unknown caller ID
information). Keep this parameter set to the default value unless a
Cisco support engineer instructs otherwise. 

This is a required field.

Default: true.

 

Unknown Caller ID Text : 

 

This parameter specifies the text that displays to called parties for
inbound calls that have no caller ID information; for example, Unknown
Caller. For the text that is specified in this parameter to display to
called parties, set the Unknown Caller ID Flag parameter to True. 

Maximum length: 23.

 

Advance service parameters under call manager

 

Scott

 

PS> have not tested it, but it looked promising.

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ahmed Elnagar
Sent: Wednesday, April 11, 2007 1:33 AM
To: Riley, Andrew; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Change default 'unknown'

 

I think that CM 4.2 has a service parameter for this.

 

Thanks and Best Regards

Ahmed A. Elnagar
Network Field Engineer

 

Advanced Computer Technology (ACT)
16 Fawzy Ramah St.Off Shehab St.Mohandessin, Giza, Egypt 
Postal Code:12411 Cairo Egypt

Mob: +2010-2833868
Website: www.act-eg.com
E-mail: aelnagar at act-eg.com

 

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Riley, Andrew
Sent: Wed 11-Apr-07 10:27 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Change default 'unknown'

Hi there, 

 

Does anyone know if its possible to change the default text of 'unknown'
when a call is received inbound from a source with no CLI? I am using an
MGCP gateway. 

 

I would like to change the text to something like 'unclassified'  is
this possible. I could not find a CM service param do reflect anything
different. 


Cheers

 

Andrew Riley 
Technical Consultant 
Communication Services 

Getronics Australia Pty Limited
Getronics combines the service capabilities of the original Dutch
company with those of Wang Global, acquired in 1999, and of the Olivetti
systems and services division. We are ranked second worldwide in network
and desktop outsourcing and fourth in network consulting and integration
(Source: IDC 2002-2003).

2 Minna Close
Belrose NSW 2085
Australia
Mob: +61 (0)402 894 793
Fax:  +61 2 9847 7378
Email: andrew.riley at getronics.com

Communication Services | Security Services | Application Services |
Workspace Management Services | Technology Transformation Services
www.getronics.com.au <http://www.getronics.com.au/> 

Please note that whilst we take all care, neither Getronics nor the
sender accepts any responsibility for viruses and it is your
responsibility to scan for viruses. The contents are intended only for
use by the addressee and may contain confidential and/or privileged
material and any use by other than the intended recipient is prohibited.
If you received this in error, please inform the sender and/or addressee
immediately and delete the material.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070412/9ff368ec/attachment-0001.html