[cisco-voip] Dial Peer Matching

Lelio Fulgenzi lelio at uoguelph.ca
Mon Apr 16 08:36:02 EDT 2007


I'd like to configure my two FXO ports as MGCP, but this note talks about not using CCM config. Can I still use the CCM config statements to control the PRIs and then manually configure the FXOs?

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...there's no such thing as a bad timbit...

  ----- Original Message ----- 
  From: john Franklin 
  To: cisco-voip at puck.nether.net 
  Sent: Wednesday, April 04, 2007 12:45 AM
  Subject: Re: [cisco-voip] Dial Peer Matching




  Steven, yes you are correct... its a stupid bug/feature by design (in my opinion) but your H323/SRST dial peers have to be in the config after the MGCP dial-peers (doesnt matter what numerical order, just after the mgcp peers in a show run). Be carefull not to use CCM config as this places the MGCP dial peers in after your existing config. 

  John

   
  On 4/3/07, STEVEN CASPER <SCASPER at mtb.com> wrote: 
    Installed a site tonight with analog FXO trunks controlled via MGCP.
    Outbound calls worked fine but inbound did not. Looking at a debug of 
    the dial peers I could see that the inbound calls were matching the
    dial
    peers that were built for SRST. These were in front of the MGCP dial
    peers in the router config.

    Removed  the SRST dial peers and inbound worked fine. Added them back 
    in and inbound still works ok Now they are after the MGCP dial peers
    in
    the config. Are dial peers searched on a hierarchical basis? I would
    have thought that because the FXO ports were controlled by MGCP the 
    dial
    peers configured for SRST would not have been used.



    Thanks!

    Steve Casper
    Voice Technologies
    M&T Bank
    (410) 347-6026

    ************************************
    This email may contain privileged and/or confidential information that is intended solely for the use of the addressee.  If you are not the intended recipient or entity, you are strictly prohibited from disclosing, copying, distributing or using any of the information contained in the transmission.  If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.  This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act.  You may not directly or indirectly reuse or disclose such information for any purpose other than to provide the services for which you are receiving the information. 
    There are risks associated with the use of electronic transmission.  The sender of this information does not control the method of transmittal or service providers and assumes no duty or obligation for the security, receipt, or third party interception of this transmission. 
    ************************************

    _______________________________________________
    cisco-voip mailing list
    cisco-voip at puck.nether.net
    https://puck.nether.net/mailman/listinfo/cisco-voip 





------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070416/721a68c8/attachment.html 


More information about the cisco-voip mailing list