[cisco-voip] VG224

[Reto Gassmann]

Hi Robert

I will give it a try tomorrow.

Thanks Reto
----- Original Message ----- 
From: "Robert Harvey" <roharvey at flemingc.on.ca>
To: <cisco-voip at puck.nether.net>
Sent: Tuesday, April 17, 2007 5:11 PM
Subject: Re: [cisco-voip] VG224


> Hi Reto,
> 
> It sounds as though you need to enable ip routing (global command):
> 
> Your_VG224(config)#ip routing
> 
> 
> Hope it helps,
> 
> Robert.
> 
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> 
> Hello all
> 
> we have a problem with a VG224 Gateway. We connected it to our
> Callmanager
> 4.2(3) and configured some ports (MGCP). When we want to make a call
> from a
> phone attached to the VG224 the destination phone rings and I can pick
> up the
> call. However I don't get a voice connection. The call terminates and I
> get the
> busy signal. After that I have to reboot the Port on the VG224.
> 
> Has anyone an idea??
> 
> Thanks Reto
> 
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>