[cisco-voip] trunk connection analogue line callerID problem

[gokhan senol]

hi 
ccme 3.3 2851 router 
design is: 75 ephone users . 
Also the manager has analogue direct line for special customers.. and i added plar connection for this analogue line.and only the manager must use this line when he calls outside . for this reason i also added trunk config.

the config below .
! 
voice-port 0/2/3 
timeouts wait-release 3 
connection plar opx 99 
description Analogue direct line for the manager 

dial-peer voice 801 pots 
destination-pattern 801 
port 0/2/3 

ephone-dn 2 
number 99 
label direkt line
name test 
hold-alert 30 originator 
trunk 801 timeout 10 

problem is: when someone call the manager from pstn his direct analogue line number , on the manager's ephone display shows 801 as callerID. 
i cant remove 801 dial-peer config because i need a number for trunk connection . But i wanna see the what is the caller id  . who is the calling.
how can i fix this 

thanks

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070418/835d3ceb/attachment.html