[cisco-voip] PRI MGCP

[Ryan Ratliff]

You would have to have the gateway added to CM as an H.323 gateway as well
as MGCP.  Then you have to use a route pattern to hairpin the call back to
the H.323 process on the router.  There is no way to do this in the gateway
itself.  All calls on an MGCP controlled PRI are sent to CM.
 

-Ryan 

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ahmed Elnagar
Sent: Wednesday, April 18, 2007 8:26 AM
Cc: cisco-voip at puck-nether.net
Subject: [cisco-voip] PRI MGCP



Hello;

again regarding the PRI configuration.

is it possible to configure the gateway in MGCP and make the PRI E1 MGCP
controllered and then select a certain dialed number from the E1 range to be
forwared to another device using a VOIP dial peer on the router instead
forwarding the call to the callmanager.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070418/5e42e31f/attachment-0001.html