[cisco-voip] One way Unity Audio Issue

[Carter, Bill]

Check routing with Unity.  Does it have the correct default gateway?
Does the default gateway have a route to the phones?  Can the phones
ping unity?

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Countryman,
Edward
Sent: Tuesday, April 24, 2007 10:02 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] One way Unity Audio Issue



Hello.

 

I have a remote site whose Cisco phones sit behind an existing Avaya
pbx.  Calls are placed / received between the pbx and a Cisco 3825 via
T1 cross over cable.  This works fine.  However, whenever a call placed
from the pbx to an IP phone covers to unity voice mail, Unity can not be
heard although it appears to answer. (the call connects).  Unity is
located remotely, however IP to IP calls work fine when covering to VM
for the same phone.  Anyone have any ideas?    

________________________________

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070425/47866808/attachment-0001.html