[cisco-voip] External Phone Number Mask not recognized

[Voll, Scott]

Route pattern set to use the mask?

Scott

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kalle Tetto
Sent: Thursday, April 26, 2007 12:47 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] External Phone Number Mask not recognized

Hi,

I would like to surpress the internal DDI on some phones, therefore I 
use the External Phone Number Mask on a line and put the number to send
in.

Unfortunatley this does not work with my actual CCM setup 4.2(3). I have

used it so many times before and it has always worked. But not in the 
actual setup. I can also see the changed DDI in the upper row of the 
Phone correct?
Any ideas, is there a special option in the general Call Manager setting

which I miss?

Cheers

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip