[cisco-voip] ip communicator and autoupdate

[Ryan LaTorre (rylatorr)]

There's an auto-update facility available to allow users to
automatically download CIPC updates.  You have to run the CIPC
administration tool to take advantage of this.  Here's some more info:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/i
pc/admin2_0/cadins.htm#wp1146663
 
Since users often don't have administrative privileges on their PC, many
customers prefer to use a software deployment tool (such as SMS or
Altiris) to push out the updated MSI package.
 
-Ryan

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Thursday, April 26, 2007 4:18 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] ip communicator and autoupdate


i can't get my head around this topic.
 
if i update the firmware load information in callmanager, does that
effectively upgrade the IP communicator installation? or is the firmware
load in the device defaults and phone configuration page something
different than the software version?
 
 
------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...there's no such thing as a bad timbit...

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070426/7aa22911/attachment.html