[cisco-voip] ISDN to ISDN hairping on CME40

[Matthias Schaerer]

hi,

i want to allow an ISDN hairpin on a PRI with no success so far. I tried 
anything in terms of transfer system commands (full-blind, full-consult, 
local-consult) and i have a transfer pattern of .T in the config. But 
after dialing the last digit of my mobile number i always get a busy 
signal.

neither the debug voice dialpeer all or the debug voice ccapi inout 
command show anything while i'm dialing the digits of my mobile number, a 
sniffer trace shows that the digits are sent to CME.

does anybody have an idea if the isdn to isdn hairpinning is supported 
anyway and if so, what commands might be worth a try in my case?

thanks
mat
-----------------------------------------------------------------------------------
Matthias Schaerer
Network Engineer, Instructor
Mob: +41 79 419 4557

http://www.anyweb.ch - All you want to know about taking care of networks 
is here.
http://www.anyweb-osys.ch - All you want to know about networking training 
is here.
(Don't be afraid to ask.)

In case of trouble with resending emails to me 
mailto:matthias.schaerer at anyweb.ch
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070428/ede989d0/attachment-0001.html