[cisco-voip] dial peer for Modem call

[Turpin, Mark]

You're asking for a dial-peer so I'm wondering - can it complete the call at all?
 
If you can complete the call, but just want to match the call on the outbound, on your PSTN gateway use 'answer-address' on a voip peer to match the called party.
 
Finally, there's been some rumblings that relay is generally more successful than passthrough...
http://www.commsdesign.com/showArticle.jhtml;?articleID=16500688
 
-Mark
 
--

Mark Turpin
Senior Consultant - Unified Communications
Calence, LLC
IP Phone: 314.656.2315
Mobile: 314.629.8714
www.calence.com
2005 Cisco Global Channel Partner of the Year - US/Canada

_________________________


The information contained in this message and any attachment may contain privileged or confidential information protected from disclosure. If you are not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any review, dissemination, distribution or copying of this information is strictly prohibited.  If you have received this transmission in error, please notify the sender immediately by replying to this message and destroying the original and all copies.  Thank you.


________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Voll, Scott
Sent: Fri 4/27/2007 3:21 PM
To: cisco-voip at puck-nether.net
Subject: Re: [cisco-voip] dial peer for Modem call



Voice Service voip

Modem passthorugh nse codec u711ulaw

 

________________________________

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Friday, April 27, 2007 8:36 AM
To: cisco-voip at puck-nether.net
Subject: [cisco-voip] dial peer for Modem call

 

I was using MGCP and converted to h323.  I'm now seeing problems with an out bound Modem calling out.

 

How can I setup a dail peer for the number that the modem is calling?

 

Thanks

 

Scott