[cisco-voip] ISDN to ISDN hairping on CME40

Matthias Schaerer matthias.schaerer at anyweb.ch
Sun Apr 29 13:31:57 EDT 2007


Thanks Kalle,

your answer gave me the courage to think that my config should work. The 
solution was not your proposed translation (I assume I have a very gentle 
provider) but I stumbled across the transfer max-length command. When 
setting it to the maximum (which according to Cisco documentation is the 
default) my transfers worked fine.

Thanks again, it's good to be in this forum. Thanks to all the other 
contributors too.
Mat
-----------------------------------------------------------------------------------
Matthias Schaerer
Network Engineer, Instructor
Mob: +41 79 419 4557

http://www.anyweb.ch - All you want to know about taking care of networks 
is here.
http://www.anyweb-osys.ch - All you want to know about networking training 
is here.
(Don't be afraid to ask.)

In case of trouble with resending emails to me 
mailto:matthias.schaerer at anyweb.ch




Kalle Tetto <tettokalle at hotmail.com>
Sent by: cisco-voip-bounces at puck.nether.net
29.04.2007 10:08

 
        To:     cisco-voip at puck.nether.net
        cc: 
        Subject:        Re: [cisco-voip] ISDN to ISDN hairping on CME40


Hi,

this has solved my problem I had with CME PRI Hairpining:

http://www.cisco.com/en/US/partner/products/sw/voicesw/ps4625/products_tech_note09186a0080816cac.shtml

Cheers

Matthias Schaerer schrieb:
>
> hi,
>
> i want to allow an ISDN hairpin on a PRI with no success so far. I tried
> anything in terms of transfer system commands (full-blind, full-consult,
> local-consult) and i have a transfer pattern of .T in the config. But
> after dialing the last digit of my mobile number i always get a busy
> signal.
>
> neither the debug voice dialpeer all or the debug voice ccapi inout
> command show anything while i'm dialing the digits of my mobile number,
> a sniffer trace shows that the digits are sent to CME.
>
> does anybody have an idea if the isdn to isdn hairpinning is supported
> anyway and if so, what commands might be worth a try in my case?
>
> thanks
> mat
> 
-----------------------------------------------------------------------------------
> Matthias Schaerer
> Network Engineer, Instructor
> Mob: +41 79 419 4557
>
> http://www.anyweb.ch - All you want to know about taking care of
> networks is here.
> http://www.anyweb-osys.ch - All you want to know about networking
> training is here.
> (Don't be afraid to ask.)
>
> In case of trouble with resending emails to me
> mailto:matthias.schaerer at anyweb.ch
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070429/54dcc031/attachment.html 


More information about the cisco-voip mailing list