[cisco-voip] cross over cable

[Lelio Fulgenzi]

i'm guessing it depends if it's Cisco inline power or aef power. cisco inline power i believe uses unused pairs so it would power up. aef power uses used pairs which might be crossed so it might not power up.

that's my guess.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...there's no such thing as a bad timbit...

  ----- Original Message ----- 
  From: Voll, Scott 
  To: ciscovoip 
  Sent: Monday, April 30, 2007 12:19 PM
  Subject: [cisco-voip] cross over cable


  What would an IP Phone do if it was connected via a cross over cable?  

   

  Scott



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070430/cc579b35/attachment.html