[cisco-voip] Phone URI's

[Justin Steinberg]

Here

<CiscoIPPhoneExecute>
<ExecuteItem Priority="1" URL="Key:Hold"\>
<CiscoIPPhoneExecute\>

Or if that doesn't work try this

<CiscoIPPhoneExecute>
<ExecuteItem Priority="1" URL="Key:Soft2"\>
<CiscoIPPhoneExecute\>

If needed, replace the numeral '2' above with the softkey position where
hold is located.  Starting from left, 1, 2, 3 or 4.

Justin

On 4/30/07, CarlosOrtiz at bayviewfinancial.com <
CarlosOrtiz at bayviewfinancial.com> wrote:
>
>
> I have a person in house who wrote a script that allows you to initiate a
> call from an IP phone given it's IP , waits 6 secs and then calls the next
> number in a list.  This was done to test consecutive DID numbers.  He has
> been searching through the Cisco development materials to see if we can now
> initiate a call place the call on hold and then hang up when we would like.
>   We have been looking at the URI objects but can't find one for the Hold
> softkey.   Has anyone been able to accomplish this function?
>
> Carlos
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070430/9c1cf551/attachment.html