[cisco-voip] Multicast MOH Design

[Erik Erasmus (E)]

I have finally sorted multicast MOH using the branch flashes with
multicast to the pstn gateway etc etc without using the "require mtp
tick box on the ccm gateway config"  but cannot help you with MOH
across MPLS as the networks we have as MPLS option here normally don't
have multicasting enabled and because bandwidth is so costly it is not
viable.

 

However - if you need advice to get it done streaming at branches and
having multicast MOH everywhere - let me know

 

 

erik

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
CarlosOrtiz at bayviewfinancial.com
Sent: Thursday, August 02, 2007 3:27 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Multicast MOH Design

 


Does anyone have a setup where they have a multicast enabled MPLS
network that is set up to do MOH to the remote sites?   

I am thinking of setting up multiple multicast enabled audio sources
and streaming them to the remote sites.    Each remote site may need
2-4 different streams because different business groups want different
MOH.  This would eliminate local streaming from flash because when in
SRST the local flash MOH is used and would be incorrectly played for
all business groups. 

Any thoughts or known gotchas would be appreciated. 

Carlos



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This e-mail and its contents are subject to the Telkom SA Limited
e-mail legal notice available at 
http://www.telkom.co.za/TelkomEMailLegalNotice.PDF
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070802/2cc8da7c/attachment.html