[cisco-voip] fxo ports and fct CCM 4.1.3

[Ocampo, Walter]

You need to launch the RTMT,  It will display the status of the port in
real time. 

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administra
tion_guide_chapter09186a008062a98c.html#wp28847

 

Regards,

 

Walter Ocampo

System Network Analyst

Office of Information Technology

540 S.E 3rd. Ave, Suite 300

Fort Lauderdale, FL 33301

(954) 357 8041 Cell (954) 632 8228

wocampo at broward.org

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of gokhan senol
Sent: Thursday, August 09, 2007 10:43 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] fxo ports and fct CCM 4.1.3

 

Hi

i need your help about 2 problems below

 

1.   I got CCM 4.1.3 and 2851 gateway,

there is one VIC2-4FXO  card and  FCT devices  which are connected to
these FXO ports for GSM calls

 

the problem is that sometimes FCT s are locked. And the customer wanna
see which one is locked

Is it possible to see fxo port status from callmanager . I can check it
from gateway by  executing  ' show voice port summary'   but I dont know
how to see from CCM webpage,i wanna see if the port is really used at
that moment. 

 

 

 

2.Also another thing ;  when i call GSM  from fct devices , sometimes ip
phone displays that it is connected and the connected time is increasing
but actually the call is not set up. I wait 50-55 seconds but there is
no even ring tone. 

And then i  close the phone adn call again.

 

 

thanks  a lot

 

________________________________

Take the Internet to Go: Yahoo!Go puts the Internet in your pocket:
<http://us.rd.yahoo.com/evt=48253/*http:/mobile.yahoo.com/go?refer=1GNXI
C>  mail, news, photos & more. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070809/23f6fda9/attachment.html