[cisco-voip] fxo discoonect issu on mgcp gateway

[gokhan senol]

helo

my config on mgcp gateway is below.  FCT devices are connected to these fxo ports
Mostly i face to discconnect issue. even i on-hook the phone the port is still looks up.  Gateway does not close the port.

This mostly happens on voice port 0/1/2 and 0/1/3 but not on port 0/3/0

the difference between ports are below,

i route the incoming calls into the FCT  to the IVR(attendant DN)  and for that  i need      no battery-reversal   command  on voice-port 0/1/2 and 0/1/3 (they are ericsson  fct)
If i dont use no battery-reversal   command then the calls can not be routed to the IVR.

But for routing incoming calls into voice-port 0/3/0  i dont neet this command(it is different vendor FCT)


So what can i do to handle this issue. WHich command i can add on voice-port 0/1/2 and 0/1/3 so the mgcp gateway  can close the port after call is finished.



voice-port 0/1/2
 no battery-reversal
 timing hookflash-out 500
 description 9203441
!
voice-port 0/1/3
 no battery-reversal
 timing hookflash-out 500
 description 9203442
!
voice-port 0/3/0
 timing hookflash-out 500
 description avea 0554 704 66 64


      ____________________________________________________________________________________
Fussy? Opinionated? Impossible to please? Perfect.  Join Yahoo!'s user panel and lay it on us. http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070813/36648ae3/attachment.html