[cisco-voip] Networking Unity Express and Unity using VPIM

[Pat Hayes]

I'm not sure exactly what happens if you send a 729 encoded message to 
CUE, but, you should be able to get around this by specifying the 
outgoing codec on the VPIM delivery location that you created in Unity.

Going the other way, Unity should be able to transcode the message on 
the fly without a problem. Hope this helps.

-------- Original Message  --------
From: Robert Kulagowski <bob at smalltime.com>
To: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
Subject: [cisco-voip] Networking Unity Express and Unity using VPIM
Date: 8/13/2007 10:55 AM

> If Unity 4.2(1) is running g.729 and UE 3.0.1 is g.711 only, then what 
> happens when a message is forwarded from Unity to UE using VPIM?  Will 
> the UE subscriber still be able to play the message using the TUI? 
> Howabout VoiceView Express?
> 
> What about in the other direction?  UE -> Unity?
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip