[cisco-voip] CM6 CallManager service will not stay running

[Patrick Diener]

I ran into this once... the installation was done by someone not very
experienced in setting up linux based ccms so he used some strange
settings like DHCP enabled (meaning CM gets its IP from a DHCP Server
instead of setting it statically), DNS enabled etc. after
reinstallation with the "correct" settings it was working just fine...

anything you specified during installation you didn't know what it does?!?

Regards Patrick

On 8/15/07, Ted Nugent <tednugent69 at yahoo.com> wrote:
> Hey Guys
> I've got a FRESH install of CM 6.01 which I've
> attempted on both VMWare and a legitimate MCS and both
> are reacting the same way. After the install is
> complete I go to activate the "default" services and
> the CM service runs for about 30 seconds and bombs all
> other services remain running fine. I've read that
> this is expected behavior on an upgrade however this
> is a fresh install from the ground up so it SHOULD use
> the "starter license"?? What am I missing? Any one
> else run into this?
>
> >From 6.01 Release Notes:
> Starter Licenses
> Cisco Unified Communications Manager comes
> preinstalled with starter licenses, so a file upload
> is not required. Starter licenses have no expiration
> date and are available in limited quantities. Be aware
> that starter licenses are only available for fresh
> installations; they are not available for upgrades or
> migrations from previous releases. Starter licenses
> support only one Cisco Unified Communications Manager
> node and up to 50 device license units.
>
>
> Thanks
> Ted
>
>
>
> ____________________________________________________________________________________
> Yahoo! oneSearch: Finally, mobile search
> that gives answers, not web links.
> http://mobile.yahoo.com/mobileweb/onesearch?refer=1ONXIC
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>