[cisco-voip] Factory reset pre UAL 7900

[Peder @ NetworkOblivion]

I should have mentioned that it is already sip5.2, so **# doesn't work.

Matt Slaga (US) wrote:
> Press Settings, **# (to unlock), press Network Settings, 33, then select
> "Yes".
> 
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Peder @
> NetworkOblivion
> Sent: Thursday, August 16, 2007 12:22 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Factory reset pre UAL 7900
> 
> Can anybody tell me how to factory reset a 7940 that is pre UAL?  The # 
> key during reboot doesn't work and there is a password on there, so I 
> can't do it that way.  I've googled it several ways and the only thing I
> 
> can find is using the # key (which as I said doesn't work)...
> 
> Peder
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> -----------------------------------------
> Disclaimer:
> 
> This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the
> designated addressee(s) named above only.  If you are not the
> intended addressee, you are hereby notified that you have received
> this communication in error and that any use or reproduction of
> this email or its contents is strictly prohibited and may be
> unlawful.  If you have received this communication in error, please
> notify us immediately by replying to this message and deleting it
> from your computer. Thank you.
> 
>