[cisco-voip] softkey template

[Ted Nugent]

The phone will use whatever is in the devicepool
unless its overriden by the phone device level
configuration. You can use BAT or CM5 bulk phone
update to query and bulk update multiple devices.


--- "Frazee, Timothy" <Timothy_Frazee at adp.com> wrote:

> If I set a softkey template at the device pool level
> to "template1", and
> at the device it is set to "<none>", what is the
> resulting template?
> 
> template1 or <none> ???
> 
> Does anyone know how to batch change phones from a
> setting of "<none>"
> to "template1"? Just in case?
> 
> I don't see a softkey template setting for update
> phones.
> 
> Thanks.
> 
> 
> This message and any attachments are intended only
> for the use of the addressee and may contain
> information that is privileged and confidential. If
> the reader of the message is not the intended
> recipient or an authorized representative of the
> intended recipient, you are hereby notified that any
> dissemination of this communication is strictly
> prohibited. If you have received this communication
> in error, please notify us immediately by e-mail and
> delete the message and any attachments from your
> system.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



       
____________________________________________________________________________________
Yahoo! oneSearch: Finally, mobile search 
that gives answers, not web links. 
http://mobile.yahoo.com/mobileweb/onesearch?refer=1ONXIC