[cisco-voip] path code violation error

[Philip Walenta]

You might want to look at the "cablelength" command under your E1
controller.

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of gokhan senol
Sent: Tuesday, August 21, 2007 3:39 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] path code violation error



Hi

I have trouble on my pri line. The line  comes from SDH but the distance
between the line termination point and the router is 200 meters and  i put 2
alcatel modems between them.

As you can see on the output i am getting PATH CODE VIOLATION error. 
I talked telecom an they sai everything is ok on their config. do you have
any idea about the error below.

This error  often causes stopping speeching on the line

 

thanks  a lot 

 

 

network-clock-participate wic 2 
network-clock-select 1 E1 0/2/0

 

controller E1 0/2/0
 pri-group timeslots 1-31 service mgcp

 

E1 0/2/0 is up.
  Applique type is Channelized E1 - balanced
  No alarms detected.
  alarm-trigger is not set
  Version info Firmware: 20060711, FPGA: 13, spm_count = 0
  Framing is CRC4, Line Code is HDB3, Clock Source is Line.
  CRC Threshold is 320. Reported from firmware  is 320.
  Data in current interval (691 seconds elapsed):
     0 Line Code Violations, 173 Path Code Violations
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
  Total Data (last 1 15 minute intervals):
     0 Line Code Violations, 234 Path Code Violations,
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs


  _____  

Be a better Globetrotter. Get
<http://us.rd.yahoo.com/evt=48254/*http://answers.yahoo.com/dir/_ylc=X3oDMTI
5MGx2aThyBF9TAzIxMTU1MDAzNTIEX3MDMzk2NTQ1MTAzBHNlYwNCQUJwaWxsYXJfTklfMzYwBHN
sawNQcm9kdWN0X3F1ZXN0aW9uX3BhZ2U-?link=list&sid=396545469> better travel
answers from someone who knows.
Yahoo! Answers - Check it out. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070821/e0fe5f5e/attachment.html