[cisco-voip] CCME/CUE: What is the proper way to CFD busy to CUE when the incoming call is from a SIP trunk?

[Patrick Mowry]

Found it:


voice service voip
 no supplementary-service sip moved-temporarily


Unless there is a better way...


-Patrick


-----Original Message-----
From: Patrick Mowry 
Sent: Tuesday, August 21, 2007 12:28 PM
To: 'cisco-voip at puck.nether.net'
Subject: CCME/CUE: What is the proper way to CFD busy to CUE when the
incoming call is from a SIP trunk?

Hello and thanks for the help,

  I have an incoming SIP trunk to a CCME 4.1 system. Incoming G729 calls
work just fine and if I set one of the DID numbers as the trigger to the
auto-attendant in CUE, the transcoders kick in and the call is answered
just fine.  
  My problem is with call-forward busy calls. I get the INVITE for an
incoming call and then send Trying.  This is followed by a SIP/2.0 302
Moved Temporarily with Contact: <sip:2002 at 10.33.64.145>.  The provider
then responds with an ACK and the caller gets a busy signal.  How do I
prevent CCME from sending redirect messages or to at least send the
Public IP address of the CME instead of the private IP of the service
Engine?  I do not have a firewall feature set.

Thanks,

-Patrick