[cisco-voip] Call redirection using alias command in event of WANfailure

[Avner Izhar]

Hi,

Are you getting four digits from the PSTN at site A?

Perhaps there is no match to the 1008-1012 range and therefor the alias does not kick in.

-------------------------------------------
thanks,
Avner Izhar
CCIE#15999 (Voice), CCVP, CCSI# 31623
Technical Instructor
CCBOOTCAMP - A Cisco Sponsored Organization (SO)
Email: aizhar at ccbootcamp.com
Toll Free: 877-654-2243
Direct: +1-702-968-5100 = Outside the USA
FAX: +1-702-446-8012
YES! We take Cisco Learning Credits!
Register to win a free iPhone! http://www.ccbootcamp.com/iphone.html



-----Original Message-----
From: cisco-voip-bounces at puck.nether.net on behalf of Nasses, Gus
Sent: Thu 8/23/2007 7:45 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Call redirection using alias command in event of WANfailure [bcc][faked-from][html-rem]
 
Hello List, 

 

I am looking to setup a call redirection for inbound DID survivability in a
office with remote VoIP gateway using the alias command, and previous testing
did not seem to work. 

 

I have office A with a PRI full of DIDs terminating at a 2821 and WAN
connection to Office B (head site) where the call Managers live. Office A
phones register to CM at office B. Office C also has a WAN to Office B and
registers its phones there. Office C gets its DIDs from the PRI at Office A.
This all works fine, but we want to eliminate any busy tones if WAN links die
during office hours. If office C loses its WAN, then calls will go to unity
from the CM at Office B or can be redirected from there, which is fine. 

 

Problem is, If Office A loses its WAN, SRST kicks in and they can still
receive calls, but then the DIDs for Office C go to busy. We want to redirect
these DID calls to another extension at Office A until the WAN comes back up,
so the calls can be answered by another user.  Here is how we had it
configured (on the Office A 2821) and it did not seem to work. (1000 and 1002
are extensions at Office A, and 1008-1012 are extensions at Office C)

 

call-manager-fallback 

 timeouts interdigit 3

 ip source-address 172.21.1.1 port 2000 strict-match

 max-ephones 144

 max-dn 288

 default-destination 1000

 access-code pri 9 direct-inward-dial

 alias 1 1008 to 1002

 alias 1 1009 to 1000

 alias 1 1010 to 1000

 alias 1 1012 to 1002

 

 

Is there something else I am missing? Do I need to somehow tell the SRST
config something more about the inbound DIDs since it has lost connection to
CM? 

 

TIA, 

 

Gus Nasses

gnasses at yahoo.com

 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070823/87d48d25/attachment.html