[cisco-voip] 4.2.3sr2b Hunt Pilot rings fast busy

[Baumgartner, Matthew]

Hi Guys,
 
You need to do an update / reset on the lines (8307,8338) that are on the phones within the hunt group.
This should fix the issue.
 
Hope this helps.
 
Matt Baumgartner
Senior Technical Consultant 
Communication Services 
CCIE #14535 Voice

Getronics Australia Pty Limited 
Getronics combines the service capabilities of the original Dutch company with those of Wang Global, acquired in 1999, and of the Olivetti systems and services division. We are ranked second worldwide in network and desktop outsourcing and fourth in network consulting and integration (Source: IDC 2002-2003).

2 Minna Close 
Belrose NSW 2085 
Australia 
T: +61 2 9847 7662 
F: +61 2 9847 7157 
M: + 61 411 126 709 
Email: matthew.baumgartner at getronics.com <mailto:matthew.baumgartner at getronics.com> 

Communication Services | ICT Security | Network Integration Services | Network & Desktop Outsourcing | Application Integration & Management
www.getronics.com.au <http://www.getronics.com.au/> 

Please note that whilst we take all care, neither Getronics nor the sender accepts any responsibility for viruses and it is your responsibility to scan for viruses. The contents are intended only for use by the addressee and may contain confidential and/or privileged material and any use by other than the intended recipient is prohibited. If you received this in error, please inform the sender and/or addressee immediately and delete the material.
 

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Erik Erasmus (E)
Sent: Tue 28/08/2007 4:02 PM
To: Jason Aarons (US); cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 4.2.3sr2b Hunt Pilot rings fast busy



I also had problems with the attendant Q and hunt operation in 4-2-3-sr1.  Now on SR2b. So far the AC queuing and hunt groups / pilots works better but there is a lot of funnies still in general. I heard that SR3 is coming in October and hope it will make the solution more stable overall. 

 

Sorry – can not give you any specific advise. Have you tried using a different hunting algorithm

 

Erik Erasmus

 

 

________________________________

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons (US)
Sent: Monday, August 27, 2007 8:08 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 4.2.3sr2b Hunt Pilot rings fast busy

 

I see a Hunt Pilot 3695 pointed to Hunt List, which points to Line Group with 2 members (8307,8338) in broadcast.  Hunt List is reset, shows good, reset a couple more times for good luck.  All CSS have correct partitions, etc. No shared lines anywhere. No duplicate numbers on Hunt Pilot or unassigned dns, etc.

 

I get fast busy dialing Hunt Pilot 3695. I tried changing 3695 to 5555 as we have no numbers beginning with 5....reset Hunt List, still fast busy…

 

I’ve set this up hundreds of times with no problems, maybe a bug with 4.2.3sr2b?

 

________________________________

Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you. 



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This e-mail is subject to an electronic communication legal notice, available at :
http://www.telkom.co.za/TelkomEMailLegalNotice.PDF
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~