[cisco-voip] CME 4.1-unknown number

[Lawrence E. Bakst]

My config is different than yours, but do you have "caller-id enable" on the "voice-port"?

leb


At 3:34 AM +0000 8/30/07, david wrote:
>Hi folks,
>I'd been configuring a CME, it has 4FXS/DID and 4FXO ports, FXO ports  has a standard configuration with a DIAL PEER and a conection PLAR, but when someone call through PSTN, the IP PHONES (7940 and 7912) display UNKNOWN NUMBER.
>If some body could give me a clue?
>Thanks and best regards.
>David
> 
>
>
>
>Sé un Mejor Amante del Cine
>¿Quieres saber cómo? <http://us.rd.yahoo.com/mail/es/tagline/beabetter/*http://advision.webevents.yahoo.com/reto/entretenimiento.html>¡Deja que otras personas te ayuden! .
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip