[cisco-voip] CM Caller Name PRI support

[Jason Aarons (US)]

My understanding is it's a switch change, versus a per port.

 

I haven't found a telco that would change to accommodate Cisco, in 2001
I had my Cisco AM submit a PERS requesting callmanager 7900 phones
receive calling party name under h323 in any method delivered by telco
to gateway, check with your Cisco AM/SE on having them escalate the
resolution.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Carter, Bill
Sent: Thursday, August 30, 2007 11:12 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CM Caller Name PRI support

 

I have tried talking to a couple of Telco's regarding Caller Name
support on PRI trunk.  Both vendors have been confused on the terms
"Display ie" and "Facility ie".  Any suggestions on this for talking to
Verizon or SBC/ATT ?




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070831/39b4355a/attachment.html