[cisco-voip] Pause before sign-in prompt in Unity

[Michael Back]

In my opinion, the delay is not all that bad.  The only reason I am
checking into it is because I did receive a few calls about it.  The
system prompts were replaced when we did the update.  Delay before
opening is set to 0.  I am having a hard time seeing if the call state
is connected during the delay since the delay is not long enough.  I was
thinking that maybe the delay could be part of the message, but I am not
sure where to find the message and which message it is.

Thanks for your help.

>>> Pat Hayes <pat-cv at wcyv.com> 12/4/2007 5:33 PM >>>
Check the Edit Switch Utility. Hit Edit and make sure that 'Delay
before 
opening' is 0. Outside of that, there really isn't any way to introduce

a delay, unless the default system prompts have been replaced. Confirm

that the call is actually in the connected state during this perceived

delay?

-------- Original Message  --------
From: "Michael Back" <Michael.Back at nisd.net>
To: cisco-voip at puck.nether.net 
Subject: [cisco-voip] Pause before sign-in prompt in Unity
Date: 12/4/2007 6:08 PM

> We just did an update of our Unity system from 4.0(3) to 4.0(5).  One
of
> the complaints I have been getting is due to a brief pause before
the
> prompt plays for the subscriber to sign in.  How can I get rid of
this
> pause?  Is it a part of the prompt itself or is there an adjustment
I
> can make somewhere to eliminate it?
> 
> Thanks,
> 
> Mike
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-voip 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip