[cisco-voip] Cisco 1310 Wireless Bridge

[Syed Khalid Ali]

Hi,

Has any one configured Cisco 1310 as an Access Point?
I'm trying to setup the connections as follows:
<wireless-client>-----<access-point>-----<3-com-switch>-----<dsl-modem>
                                                                  |
                                                                  |
                                                            <wired-client>

Now there are 3-interfaces on access-point/wireless bridge.Initially configuring the BVI interface and after that used the GUI mode to configure, clients alway get connected in guest mode with unknown DHCP server(that is not configured on AP and ranged from 192.168.1.x/24) and are disconnecting frequently.

Attached is the configuration. 
What am I missing in this config?
            
Need help?

regards,
Syed Khalid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071206/44934a48/attachment.html 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: ap-1310 config.TXT
Url: https://puck.nether.net/pipermail/cisco-voip/attachments/20071206/44934a48/attachment.ksh