[cisco-voip] SSH access to CUCMBE

[Jonathan Charles]

You need to boot off of the recovery disk and follow the pw change options...


J

On Dec 9, 2007 5:53 PM, Jason Wydra <jasonwydra at gmail.com> wrote:
>
>
>
> On 12/9/07, Jason Wydra <jasonwydra at gmail.com> wrote:
> >
> > Running CUCMBE version 6.0.1. Wondering about the SSH access to the CLI.
> When I try to SSH from a reomte DOS prompt, I get prompted to enter a
> password for the admin account .
> >
> > I tried to use the same password that was set for the UM Admin/OS pages
> bit it's denied. I didn't install the software and my client doesn't know
> what the SSH CLI login might be. Is there a default password for SSH, or a
> way to reset the current one? I'm trying to get to the TFTP CLI options so I
> can hopefully back-up this system for once.
> >
> > Thanks,
> > Jason
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>